View on GitHub

installation-guides

Installation Guides

Before

Install the mobile app

Android App
iOS App

(Can also be done from the web if the Device is connected to WiFi)

If the device isn’t connected to WIFI you must be at least 10 feet from the device to continue the setup.

Important: Before starting this setup you will need a monta serial number from the App you can get that by going into the Charge Point Integration and creating a Wall Box Puslar OCPP integration where you should be present with a serial number

Step 1

Login with the user credentials

Step 1


Step 2

Select the charger you want to pair to Monta’s services

Step 2


Step 3

Once you have selected the charger wait until the connection is made, the screen background should go from purple to green when this occurs. Once that is ready you should click the settings Icon at the top right.

Step 3


Step 4

Once in the settings menu you will need to check to see if the WIFI is connected by going into Connectivity

Step 4


Step 5

In the Connectivity menu make sure that the WIFI toggle is on and that you are connected to a network if not select a network from the Choose Network screen and once connected head back to the Settings menu

Step 5


Step 6

Once you’re at the Settings menu again we will need to write down the Serial number head into Charger Info

Step 6


Step 7

Here you will find the Serial Number above the label make sure to write it down as we will need it later. Head back to the settings menu

Step 7


Step 8

Now you will go into the OCPP section if you don’t see this in your menu it is because you are not connected to the device make sure to check your connection if so.

Step 8


Step 9

Once you reach the OCPP menu you will need to enable the toggle switch and fill out the forms

url: ocpp.monta.app charge point identity: {montaSerialNumber}

be sure to read and accept the terms and click save and you should be taken to the main menu

Step 9


Step 10

From the main menu you should be able to reconnect to the charging device and see the OCPP connected icon that will confirm that you have successfully paired your device

Step 10