View on GitHub

installation-guides

Installation Guides

Before

Download the iOS or Android on your phone
iOS App
Android App
Note: You must be within 10 feet of your device in order to change the OCPP provider


Step 1

Login using your credentials

Step 1


Step 2

Once logged in you will need to pair to the device (if paired already continue to step 4) click on the “Connect Charger” button

Step 2


Step 3

Then you should see a screen where you can select from multiple charges go ahead and click on the charger you are trying to connect to, after which you will need the pin code provided by the customer in the Charger Sync application under the Me > My Device section located at the bottom of the screen

Step 3


Step 4

Once paired it’s necessary to check if the device is properly connected to a network click on the Charger Link button

Step 4


Step 5

Verify that the device is connected to a LAN or Wifi network then head back to the main menu

Step 5


Step 6

At the main menu you will continue to the OCPP Server section by clicking on the button

Step 6


Step 7

Once you arrive at the OCPP section you will see an empty list and above that list you should see the Locally Cache Server + go ahead and click on the + button

Step 7


Step 8

From there you will need to select the list item with the value https://ocpp.monta.app:443 and click on the download button after which you should be taken back to the OCPP menu

Step 8


Step 9

Now the list should no longer be empty and you should have at least one item in the list that corresponds to the following value: https://ocpp.monta.app:443 click next to continue

Step 9


Step 10

Once you arrive at the configuration menu you might need to toggle the Enable External Access toggle switch after which you should see a small menu pop up where you can click on server info. Go ahead and click on it

Note: At this point you should save the Serial number in this section as it’s the value that you will need to register your device with Monta

Step 10


Step 10

A small menu should pop up from the button where you can select the configuration you downloaded earlier. Go ahead and click on the configuration that says https://ocpp.monta.app:443

Step 10


Step 11

Once selected you should be able to click on Configure or Ok and if everything goes okay you will see the following 3 checkmarks. If any error occurs please go to the main screen and retry from step 5. Otherwise take a screenshot of the error and forward it to support.

But if everything goes correct you should be able to go back to the main menu and continue the registration on the Monta app using the OCPP provider

Step 11